E3 downgrader firwmare improved, fix some console BD problem, it’s beta version .
Tag Archive for e3 downgrader
New E3 jailbreak firmware released, support 3.55SPOOF
New E3 jailbreak firmware released, support 3.55SPOOF, and simplify free psgroove usage. Before need change name into h.hex or k.hex . now any psgroove change name into one name which is free.hex (same way for hermes and kakaroto hex) , please note this 3.55SPOOF only stops you from updating to v3.55.
E3 Card Reader Releases a new downgrader to fix Blu-Ray Problems!
Today E3DIY.net the makers of the E3 Card Reader have improved their E3 downgrader firmware, to fix some console’s Blu-Ray Movie Playback problem!
Please NOTE: This is a BETA version and also is ONLY for the E3 Card Reader!
Here is the updated steps:
1: Copy “e3downgrader fix BD beta.bin” into E3 upgrader disk!
2: Insert E3 Card Reader into PS3 Right-Most USB port (near BD drive).
3: Jailbreak PS3 the normal way (power then eject), after few seconds, the console will auto shutdown.
4: Remove E3 Card Reader from PS3, and reset console, it will now enter the Factory/Service mode.
5: Continue with the rest of the normal downgrading steps, using the leaked DGF.rar package.
What is the difference with old original E3downgrader firmware?
After the Power/Eject cycle with the old downgrader firmware, and most of the cloned downgrader firmwares it will continue to allow the PS3 to power-up until the full PS3 XMB menu boots-up, this was the point were the Blu-Ray Movie playback got destroyed.
With our new E3 Downgrader firmware, it cause the PS3 to switch off right away after doing the Factory/Service handshake without booting into the XMB menu, protecting the contents of your flash.
E3 card reader problem has been fixed up
Recently,there was a problem came out when players use the E3 card reader. When you removed the E3 card and re connect it again, the system will be halted. Now they have found out where the problem is, they also figure it out that not only PS3 has this problem , but also other Sony devices have this trouble as well. this issue happens when you remove and reconnect the multiple mass-storage devices at the same time.
Now E3DIY team has released a update to solve this problem ,let’s take a look:
First please download here : E3fix usb freeze.rar
Quote:”
You can download the upgrading package from here.“
“So, E3DIY releases a new firmware to walk-around. You can upgrade your E3card Reader follow the instructions listed below:
1. Plug the E3card Reader in your PC USB port and wait for the removable driver E3Upgrader
2. Copy the ResetToKernel.bin to the E3Upgrader, wait until the E3Upgrader disappeared.
3. Wait for a removable driver named Kernelboot, and then copy the “e3fix usb freeze.bin” to this driver.
4: After doing these, you can copy other normal function files such as the one used to downgrading or those used to jail-breaking or the one used to protect your TF card, or other application in the future.